Return to the translated text click here3M Epoxidharz Zinnersatz-Spachtel
Gebrauchstemperatur: 10-40°C
Optimale Gebrauchstemperatur: 15-35°C
Verarbeitungszeit: 15-20 Minuten bei 22°C
Schleifzeit: 4 Stunden bei 22°C oder 10-20 Minuten bei 70°C Objekttemperatur (IR-Trocknung)
Gebrauchshinweise: Beste Trocknung wird durch Erwärmen des Untergrunds auf ca.30°C vor dem Materialauftrag erzielt, insbesondere bei
niedrigen Umgebungstemperaturen.
- Nach 20 Minuten schleifbar bei forcierter Trocknung
- Lufttrocknung 4 Stunden (abhängig von Schichtstärke und bei Raumtemperatur von 22°C)
- Blei- und lösemittelfreies Produkt
- Kalt zu verarbeiten, keine offene Flamme erforderlich
- Sehr gute Schleifbarkeit sowie hervorragenden Korrosionsschutz
- Deutliche Reduzierung der Reparaturinstandsetzungszeit in der Karosserie, aufgrund schnelltrocknenden Zinnersatz und folglich Kostenreduzierung
- Bietet eine fachgerechte hochwertige Reparatur
- Der schnelltrockende Epoxidharz Zinnersatz-Spachtel ist geeignet um Oberflächenbeschädigungen, in Form von Beulen, Rückverformungen oder Teile die eingeschweißt wurden, zu reparieren
- Für Stahl, Zink und Alu Oberflächen
Inhalt: 180 ml
This is an automatic translation. Click here for the original text in German3M epoxy resin tin replacement filler
Use temperature: 10-40°C
Optimum use temperature: 15-35°C
Working time: 15-20 minutes at 22°C
Sanding time: 4 hours at 22°C or 10-20 minutes at 70°C object temperature (IR drying)
Instructions for use: Best drying is achieved by heating the substrate to approx.30°C before applying the material, especially at
low ambient temperatures.
- Can be sanded after 20 minutes with forced drying.
- Air drying 4 hours (depending on layer thickness and at room temperature of 22°C)
- Lead and solvent free product
- Cold application, no open flame required
- Very good sandability as well as excellent corrosion protection
- Significant reduction in body repair time, due to fast drying tin substitute and consequent cost reduction
- Provides a professional high quality repair
- The fast-drying epoxy resin tin replacement filler is suitable for repairing surface damage, in the form of dents, deformations or parts that have been welded in place
- For steel, zinc and aluminum surfaces
Content: 180 ml