...
pdf
 
Important note: For pricing information and to place an order, please log-in with your customer number. If you are a dealer and have any questions on articles and prices, please use the feedback function on the right.
back to overview

This product is listed in these product groups:

 

METALLPASTE 739G TEROSON
UP 130

Metallpaste 739G Teroson UP 130
H226
Liquid and vapor flammable.
H315
Causes skin irritation.
H319
Causes severe eye irritation.
H361d
Suspected of damaging the unborn child.
H372
May cause damage to organs (specify all organs affected) through prolonged or repeated exposure (specify route of exposure if it is conclusively established that no other route of exposure presents this hazard).
JM-No.:
555.03.02
Product:
METALLPASTE 739G TEROSON
UP 130

Description


This is an automatic translation. Click here for the original text in German

TEROSON UP 130 sealing spatula

  • Universal scraper for emergency repairs, resistant to oil, water, the most common chemicals and high temperatures
  • Suitable for the following repairs: gas tanks, radiators, concrete, casings & castings and many others
  • Suitable for the following surfaces: steel, aluminum, galvanized steel, glass fiber, copper and tin

Mixture (component A + B)

Mixing ratio 100: 2-3

Dripping time (20 ° C, 50% rh) 4.5 min.

Sandability after 15 to 20 min.

 

preparation

  • The surface to be filled must be free of grease, clean and dry
  • In case of rust, it must be removed and then the corresponding
  • Sand the repair area with 120 grit sanding paper
  • The paint around the repair site need not be removed as soon as the existing paint has good adhesion
  • It is recommended to clean and pretreat the repair site with TEROSON VR 20 before the next operation

 

PROCESSING

  • Mix the putty in volume ratio (polyester resin to hardener TEROSON UP 190) Golf ball size (40mL) to pea size 4 to 5 cm (2 to 3%) until a homogeneously mixed mass is reached
  • After mixing, the dripping time is about 4.5 minutes at 20 ° C
  • Apply mixed putty to the repair site so that dents, scratches or surface irregularities are completely filled
  • Higher layer thicknesses should be built up to avoid cracks in several operations
  • The putty can be sanded at room temperature after 15 to 20 minutes. Accelerated curing by heat is possible 10 minutes after application (at a maximum of 60 ° C by IR lamps or in the oven)

 

Content: 739 g


Media

 Safety Data Sheet ( DE )